This high-impact 0.283-inch thick polycarbonate stock sheet, sized at 18" x 16", offers exceptional durability and thermal resistance, making it a superior choice for demanding heating and cooling applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.283" |
| Length | 18" |
| Width | 16" |
Specified by design engineers worldwide, this 0.283" thick polycarbonate stock sheet (18" x 16") provides an optimal balance of impact strength, clarity, and thermal insulation. Its inherent UV resistance and wide operating temperature range make it suitable for both indoor and outdoor environments within HVAC systems, heat exchangers, and protective enclosures. The material's excellent rigidity ensures structural integrity under thermal stress, while its ease of fabrication allows for precise component manufacturing.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Accurately measure and cut the polycarbonate sheet to the required dimensions using a fine-tooth saw or laser cutter. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools that can cause chipping or melting. | Employ specialized polycarbonate cutting blades or laser cutters for a clean, precise edge. |
| Drilling holes too close to the edge or without adequate clearance. | Drill holes at least twice the sheet thickness from the edge and use a drill bit designed for plastics. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: HVAC system components, Protective guards for heating elements, Windowing for enclosures in temperature-controlled environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||