This 0.269" thick polycarbonate stock sheet is engineered for extreme conditions in pulling and lifting operations. Its exceptional impact resistance and clarity ensure reliable performance in high-stress environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.269" |
| Length | 22" |
| Width | 17" |
Purpose-built for heavy-duty applications, this polycarbonate stock sheet offers superior impact strength, exceeding that of glass and acrylic. Its dimensions of 0.269" thickness, 22" length, and 17" width provide ample surface area for custom fabrication in demanding pulling and lifting equipment. The material's inherent toughness minimizes the risk of catastrophic failure under load, while its transparency facilitates visual inspection of internal mechanisms or load status. Ideal for fabricating protective guards, mounting plates, and structural components in winches, hoists, and other material handling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Carefully position the polycarbonate sheet, aligning mounting holes or attachment points. 3. Secure the sheet using appropriate fasteners, avoiding overtightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners without proper washers. | Employ large washers to distribute load and prevent localized stress concentration on the polycarbonate. |
| Drilling holes too close to the edge. | Maintain a minimum edge distance of 1" when drilling holes to prevent material tear-out. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective shielding for winch drums, Custom mounting brackets for lifting equipment, Impact-resistant covers for hydraulic cylinders.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||