This 0.259" thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Engineered for demanding pulling and lifting applications, it provides robust protection and reliable performance in industrial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.259" |
| Length | 24" |
| Width | 18" |
Specified by design engineers worldwide, this polycarbonate stock sheet delivers superior impact strength, exceeding that of glass and acrylic. Its inherent toughness and shatter resistance make it ideal for safety guards, machine enclosures, and protective barriers in dynamic pulling and lifting equipment. The 0.259" thickness, combined with a 24" length and 18" width, provides a versatile platform for custom fabrication. Polycarbonate's excellent optical clarity allows for unimpeded visibility while ensuring critical safety standards are met.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and structurally sound. 2. Mark and drill pilot holes according to the fabrication design, using appropriate drill bits for polycarbonate. 3. Secure the polycarbonate sheet using fasteners that allow for thermal expansion, avoiding overtightening.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge without reinforcement. | Maintain adequate edge distance (typically 2-3 times sheet thickness) and consider reinforcing corners or high-stress areas. |
| Using standard metal fasteners without washers or appropriate spacing. | Employ flat washers to distribute load and allow for material expansion and contraction due to temperature changes. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guarding for overhead cranes and hoists, Impact shields for material handling equipment, Protective covers for winches and pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||