This high-performance polycarbonate sheet offers exceptional impact resistance and optical clarity. Measuring 0.252 inches thick, 21 inches wide, and 39 inches long, it provides a robust solution for demanding applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.252" |
| Length | 21" |
| Width | 39" |
Trusted by engineers across multiple sectors, this 0.252" thick polycarbonate stock sheet (21" x 39") delivers superior impact strength, exceeding that of glass by orders of magnitude. Its excellent optical clarity and UV resistance make it suitable for demanding environments. The material's inherent toughness allows for complex fabrication and thermoforming, while its lightweight nature simplifies installation and reduces structural load. This sheet meets stringent industry standards for durability and performance in architectural, industrial, and protective applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free of debris before handling. 2. Cut to desired dimensions using appropriate tooling for polycarbonate. 3. Secure the sheet using pre-drilled holes and appropriate fasteners, allowing for thermal expansion.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to stress cracks. | Maintain a minimum edge distance of at least 2 times the hole diameter when drilling. |
| Over-tightening fasteners, causing compression and potential cracking. | Use washers and tighten fasteners only until snug, allowing for expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective Glazing, Machine Guards, Signage.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||