Engineered for extreme durability, this 0.245" thick polycarbonate stock sheet offers superior impact and abrasion resistance. Its robust nature makes it the ideal material for demanding pulling and lifting applications.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.245" |
| Length | 32" |
| Width | 35" |
Specified by design engineers worldwide, this 0.245-inch thick polycarbonate stock sheet (32" x 35") is manufactured from high-impact resistant polycarbonate resin. This material exhibits exceptional tensile strength and a high modulus of elasticity, ensuring reliable performance under significant mechanical stress. Its inherent toughness minimizes the risk of fracture during dynamic loading, a critical factor in pulling and lifting operations. The sheet's dimensional stability and resistance to environmental factors further contribute to its suitability for rigorous industrial use.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled mounting holes or desired placement. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracks. | Use washers and tighten fasteners incrementally to distribute load evenly, avoiding excessive torque. |
| Using incompatible cleaning agents that can degrade polycarbonate. | Clean with mild soap and water or a specialized polycarbonate cleaner. Avoid abrasive cleaners or solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards for heavy-duty equipment, Impact-resistant shields in material handling, Wear plates and friction surfaces in pulling mechanisms.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||