This 0.222" thick Polycarbonate stock sheet, measuring 23" x 38", offers exceptional impact resistance and clarity. Ideal for robust hydraulic system components requiring transparency and strength.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.222" |
| Length | 23" |
| Width | 38" |
Engineered for reliability and performance, this polycarbonate stock sheet boasts a substantial 0.222-inch thickness, providing significant structural integrity for hydraulic applications. Measuring 23 inches by 38 inches, its high impact strength and excellent optical clarity allow for visual monitoring of fluid levels and system operation. Polycarbonate's inherent resistance to a wide range of hydraulic fluids, coupled with its broad operating temperature range, ensures consistent performance in demanding environments. This material is also recognized for its flame retardant properties, contributing to enhanced safety in industrial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Carefully position the sheet according to design specifications. 3. Secure the sheet using appropriate fastening methods, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard acrylic instead of polycarbonate for hydraulic visibility panels. | Always select polycarbonate for hydraulic applications due to its superior impact resistance and chemical compatibility with hydraulic fluids. |
| Drilling holes too close to the edge without proper reinforcement. | Maintain adequate edge distance when drilling and consider reinforcing mounting points to prevent stress concentration and potential cracking. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic reservoir sight glasses, Machine guards for hydraulic systems, Transparent hydraulic system enclosures.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||