This 0.168" thick polycarbonate stock sheet offers exceptional clarity and superior impact resistance, making it a robust solution for demanding plumbing and janitorial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.168" |
| Length | 20" |
| Width | 21" |
Built to exacting engineering tolerances, this 0.168" thick polycarbonate stock sheet measures 20 inches in length and 21 inches in width. Manufactured from high-performance polycarbonate resin, it exhibits outstanding tensile strength, rigidity, and a high degree of optical clarity. Its inherent toughness provides excellent resistance to shattering and impact, even at low temperatures, ensuring long-term durability in corrosive or high-traffic areas common in plumbing and janitorial settings. This material is also UV-stabilized, resisting degradation from sunlight exposure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired cut dimensions on the polycarbonate sheet using a fine-tip marker. 2. Utilize a high-speed saw with a fine-tooth blade (e.g., a circular saw or jigsaw) specifically designed for plastic to achieve clean cuts. 3. Smooth cut edges with fine-grit sandpaper or a deburring tool to remove any sharp or rough areas.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard wood-cutting blade, which can cause chipping and melting. | Employ a specialized plastic-cutting blade with a high tooth count for a smooth, clean edge. |
| Over-tightening fasteners, leading to stress cracks in the polycarbonate. | Use oversized holes for fasteners and incorporate neoprene washers to distribute pressure and allow for thermal expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective guards for plumbing fixtures, Janitorial station partitions, Splash guards and shields.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||