This high-impact polycarbonate stock sheet offers superior clarity and durability. Its robust construction makes it an excellent choice for demanding plumbing and janitorial environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.140" |
| Length | 36" |
| Width | 15" |
Precision-manufactured to tight tolerances, this 0.140" thick polycarbonate sheet measures 36" in length and 15" in width. Polycarbonate's inherent strength provides exceptional impact resistance, exceeding that of acrylic and glass, while maintaining excellent optical clarity. Its wide temperature range and chemical resistance make it suitable for exposure to common cleaning agents and varying environmental conditions. This material is ideal for fabricating protective barriers, replacement panels, and custom fixtures in high-traffic areas.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the sheet according to required dimensions. 2. Cut the polycarbonate using a fine-tooth saw or laser cutter. 3. Smooth all edges to remove burrs and sharp points for safe handling and installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Utilize sharp, fine-toothed blades specifically designed for cutting polycarbonate to prevent chipping and cracking. |
| Over-tightening fasteners, causing stress cracks. | Employ oversized holes or slots for fasteners and avoid direct contact with sharp-edged hardware; use washers to distribute load. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Protective Shields for Janitorial Equipment, Replacement Paneling for Shower Stalls and Restrooms, Custom Fixtures for High-Traffic Plumbing Areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||