This 0.084-inch thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Engineered for demanding HVAC applications, it provides reliable protection and thermal insulation.
| Standard | ISO 9001 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.084" |
| Length | 43" |
| Width | 17" |
Built to exacting engineering tolerances, this 0.084" thick polycarbonate stock sheet measures 43" in length and 17" in width. Its inherent toughness, high impact strength (exceeding 1600 in-lbs/in), and excellent thermal insulation properties make it a superior choice for fabricating custom HVAC ductwork components, air handling unit enclosures, and protective machine guards. The material exhibits good chemical resistance and a wide operating temperature range, ensuring performance in diverse environmental conditions found in industrial heating and cooling systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and precisely cut the polycarbonate sheet to the required dimensions using a fine-tooth saw or laser cutter. 2. Prepare mounting surfaces, ensuring they are clean, dry, and free of debris. 3. Secure the polycarbonate sheet using appropriate fasteners (e.g., stainless steel screws with neoprene washers) ensuring not to overtighten, which can cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard drill bits which can cause cracking | Utilize a high-speed drill with a sharp bit designed for plastics, and consider a pilot hole if necessary. |
| Over-tightening fasteners, leading to stress fractures | Employ snug-fitting fasteners with rubber or neoprene washers to distribute pressure and prevent over-compression. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Custom HVAC Enclosures, Air Handling Unit Components, Machine Guards for HVAC Equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||