Engineered from high-impact polycarbonate, this 0.083-inch thick stock sheet offers exceptional durability and clarity for demanding pulling and lifting tasks. Its robust nature ensures reliable performance in industrial environments.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.083" |
| Length | 23" |
| Width | 21" |
Precision-manufactured to tight tolerances, this 0.083" thick polycarbonate stock sheet boasts dimensions of 23" in length and 21" in width. Its inherent material properties include superior impact strength, excellent clarity, and good chemical resistance, making it ideal for applications where physical stress and visibility are critical. The polycarbonate construction provides a lightweight yet incredibly resilient solution for various industrial processes, including guides, guards, or protective elements in lifting and material handling systems. This material offers a high strength-to-weight ratio, crucial for optimizing equipment efficiency.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Accurately mark and pre-drill mounting holes using appropriate drill bits for polycarbonate, avoiding excessive heat. 3. Secure the sheet using corrosion-resistant fasteners, ensuring even pressure distribution to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to stress concentration and potential cracking. | Maintain a minimum edge distance of 2-3 times the fastener diameter for all drilled holes. |
| Using standard metal fasteners that can induce stress and damage the polycarbonate. | Employ self-tapping screws or bolts specifically designed for plastic, or use washers to distribute load. |
| Over-tightening fasteners, causing compression and deformation of the sheet. | Tighten fasteners until snug, then back off a quarter turn to allow for thermal expansion and contraction. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards in material handling equipment, Protective shields for automated lifting systems, Chute liners for abrasive material transport.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||