This high-performance polycarbonate stock sheet offers superior impact resistance and clarity, ideal for demanding hydraulic system components. Its robust material properties ensure longevity and reliable operation in challenging environments.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.026" |
| Length | 20" |
| Width | 31" |
Specified by design engineers worldwide, this 0.026-inch thick, 20-inch by 31-inch polycarbonate stock sheet is engineered for critical hydraulic applications. Exhibiting exceptional impact strength (Izod notched: 12 ft-lb/in), a high tensile strength (8,500 psi), and excellent chemical resistance, it maintains optical clarity (90% transmission) even under stress. Its thermal stability (continuous use temperature: 250°F) and low moisture absorption make it a preferred material for sight glasses, seals, and protective covers in fluid power systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully cut the polycarbonate sheet to the required dimensions using appropriate tools for plastics. 3. Secure the sheet using compatible fasteners and sealing methods, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or cracking. | Utilize a fine-tooth blade on a jigsaw or circular saw, specifically designed for cutting polycarbonate, and maintain a consistent feed rate. |
| Over-tightening fasteners, inducing stress points that can cause premature failure. | Employ oversized holes with appropriate washers to allow for thermal expansion and contraction, and tighten fasteners only until snug. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic system sight glasses, Protective covers for hydraulic components, Seals and gaskets in fluid power applications.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||