This high-clarity, 0.018-inch thick polycarbonate stock sheet is specifically formulated for hydraulic system components. Its exceptional impact strength and chemical resistance ensure long-term operational integrity in demanding fluid power environments.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.018" |
| Length | 21" |
| Width | 37" |
Engineered for reliability and performance, this 0.018" thick polycarbonate stock sheet (21" x 37") provides an optimal balance of rigidity and impact resistance, crucial for hydraulic manifold substrates, sight glasses, and protective shields. The material exhibits excellent optical clarity, allowing for visual monitoring of fluid levels and flow, while its inherent toughness mitigates risks associated with pressure surges and mechanical stress. Operating temperature range: -40°C to 120°C. Tensile strength: 60-80 MPa. Key for applications requiring transparency, durability, and resistance to hydraulic fluids.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning any pre-drilled holes with mounting hardware. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking. Consider using gasket material for sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard polycarbonate instead of hydraulic grade. | Utilize only hydraulic-grade polycarbonate for enhanced fluid compatibility and longevity. |
| Over-tightening fasteners, leading to stress concentration and cracking. | Employ a controlled tightening sequence and use washers to distribute load. Hand-tighten and then snug gently. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic manifold substrates, Sight glasses and inspection windows, Protective guards for hydraulic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||