This robust polycarbonate stock sheet, engineered for demanding heating and cooling applications, offers exceptional clarity, impact resistance, and thermal insulation. Its precise dimensions ensure seamless integration into various HVAC systems.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.892" |
| Length | 44" |
| Width | 16" |
Precision-manufactured to tight tolerances, this 0.892-inch thick polycarbonate sheet measures 44 inches in length and 16 inches in width. Engineered from high-impact polycarbonate resin, it exhibits superior durability, chemical resistance, and excellent thermal insulation properties, making it ideal for use as protective glazing, ductwork components, or enclosure panels within heating and cooling systems. Its high light transmission and UV stability ensure long-term performance in diverse environmental conditions, contributing to system efficiency and longevity.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting channels. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too short or too long. | Utilize fasteners of appropriate length for the substrate thickness to ensure a secure fit without damaging the polycarbonate. |
| Drilling holes too close to the edge of the sheet, leading to cracking. | Maintain adequate edge distance when drilling holes, typically at least twice the hole diameter, to prevent stress concentration. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: HVAC Enclosures, Protective Glazing for Industrial Heaters, Ductwork Linings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||