Engineered for robust performance in thermal environments, this 0.753-inch thick polycarbonate sheet offers exceptional impact strength and clarity. Its superior insulation properties make it ideal for demanding Heating & Cooling applications.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.753" |
| Length | 22" |
| Width | 21" |
Specified by design engineers worldwide, this polycarbonate stock sheet provides exceptional thermal insulation and impact resistance, crucial for advanced Heating & Cooling systems. With precise dimensions of 0.753 inches (19.13 mm) thickness, 22 inches (558.8 mm) length, and 21 inches (533.4 mm) width, it meets stringent performance requirements. Its inherent UV stability and broad operating temperature range ensure longevity and reliability in environments ranging from HVAC enclosures to industrial heat exchangers, offering a superior alternative to traditional glass or acrylic.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting brackets. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to prevent stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, leading to stress cracking. | Use washers and tighten fasteners just enough to create a snug fit, avoiding excessive torque. |
| Using abrasive cleaning agents that can scratch the polycarbonate surface. | Clean with mild soap and water using a soft cloth or sponge. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: HVAC system enclosures, Industrial heat exchanger covers, Glazing for high-temperature environments.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||