This high-performance 0.717-inch thick polycarbonate stock sheet offers exceptional impact resistance and clarity. Ideal for demanding hydraulic applications, providing robust protection and clear visibility where it's needed most.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.717" |
| Length | 43" |
| Width | 30" |
Specified by design engineers worldwide, this 0.717-inch thick polycarbonate sheet (43" x 30") is engineered for superior performance in hydraulic systems. Its inherent toughness resists shattering under high pressure and impact, while its optical clarity allows for precise visual monitoring of fluid levels and system operation. The material exhibits excellent chemical resistance to many hydraulic fluids and oils, ensuring long-term durability in challenging environments. Its ease of fabrication allows for custom-fit components, seals, and protective barriers.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mating surfaces are clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or mounting brackets. 3. Secure the sheet using appropriate fasteners, ensuring even pressure distribution to avoid stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, causing localized stress and potential cracking. | Use washers and tighten fasteners incrementally in a star pattern to distribute load evenly. |
| Exposing the polycarbonate to harsh solvents or abrasive cleaning agents. | Clean only with mild soap and water, or approved polycarbonate cleaners. Avoid abrasive pads. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic system enclosures, Sight glasses for fluid reservoirs, Protective shielding for hydraulic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||