This premium 0.582-inch thick polycarbonate sheet offers exceptional impact strength and optical clarity. Engineered for demanding environments, it provides robust protection and long-term durability for critical applications.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.582" |
| Length | 35" |
| Width | 24" |
Purpose-built for heavy-duty applications, this 0.582" thick polycarbonate stock sheet measures 35" in length and 24" in width. Polycarbonate's inherent properties, including a high impact resistance (approximately 200 times stronger than glass) and excellent clarity, make it suitable for applications requiring significant protection against breakage and physical stress. Its UV resistance further enhances its suitability for outdoor use. This material is ideal for machine guards, protective shields, glazing in high-impact areas, and various industrial enclosures where durability and safety are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the installation surface is clean and free of debris. 2. Measure and cut the polycarbonate sheet to the required dimensions using appropriate tools (e.g., fine-tooth saw, laser cutter). 3. Secure the sheet using mechanical fasteners, ensuring adequate support and avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge, leading to stress concentration and potential cracking. | Maintain a minimum edge distance of at least 2-3 times the hole diameter when drilling. |
| Using standard metal fasteners without washers, which can damage the polycarbonate surface. | Always use flat, broad washers to distribute the load and prevent localized pressure points. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine Guarding, Protective Shields, Industrial Glazing.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||