This 0.402" thick polycarbonate stock sheet offers superior impact resistance and clarity, making it ideal for demanding heating and cooling applications. Its robust nature ensures long-term performance and durability.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.402" |
| Length | 32" |
| Width | 48" |
Precision-manufactured to tight tolerances, this 0.402-inch thick polycarbonate sheet measures 32 inches by 48 inches. Engineered for exceptional impact strength (over 200 times that of glass) and UV resistance, it provides a durable, lightweight, and optically clear solution. Its thermal insulation properties contribute to energy efficiency in heating and cooling systems, while its inherent toughness resists cracking and shattering, ensuring reliable performance in environments requiring high durability and weatherability.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with pre-drilled holes or support structures. 3. Secure the sheet using appropriate fasteners, ensuring not to over-tighten which could cause stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard fasteners that are too sharp or small, leading to stress concentration and potential cracking. | Utilize oversized washers and fasteners designed for plastic sheet installation to distribute pressure evenly. |
| Drilling holes too close to the edge or too small for thermal expansion. | Drill holes at least 2 times the fastener diameter away from the edge and make them 1/8" to 1/4" larger than the fastener diameter to accommodate expansion. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: HVAC ductwork liners, Glazing for industrial greenhouses, Protective shields for climate control equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||