This industrial-grade polycarbonate sheet offers exceptional impact resistance and optical clarity. Measuring 0.386 inches thick, it's engineered for demanding applications requiring superior protection and durability.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.386" |
| Length | 20" |
| Width | 26" |
Manufactured under strict quality controls, this polycarbonate stock sheet features a nominal thickness of 0.386 inches, a width of 26 inches, and a length of 20 inches. Polycarbonate's inherent properties provide outstanding impact strength, exceeding that of acrylic and glass, making it suitable for environments where resistance to breakage is paramount. Its excellent thermal stability and broad operating temperature range ensure performance in diverse conditions. This material is also characterized by high light transmission and good UV resistance, ensuring longevity and clarity over time.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with mounting points or framing. 3. Secure the sheet using appropriate fasteners, ensuring not to over-tighten to prevent stress cracking. Consider using neoprene washers for even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge of the sheet. | Maintain adequate edge distance, typically at least twice the hole diameter, to prevent stress concentration and potential cracking. |
| Using fasteners without proper support or spacing. | Utilize a sufficient number of fasteners with appropriate spacing (refer to design specifications) and consider using framing or backing to distribute load evenly. |
| Cleaning the polycarbonate with abrasive materials or harsh chemicals. | Clean only with mild soap and water, using a soft cloth or sponge. Avoid ammonia-based cleaners, solvents, or abrasive pads which can damage the surface. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards and safety shields, Protective glazing in industrial settings, Signage and display components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||