Engineered for demanding hydraulic environments, this 0.360-inch thick polycarbonate sheet delivers exceptional impact strength and optical clarity. It's a reliable, robust material for custom fabrication.
| Standard | ASTM A106 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.360" |
| Length | 21" |
| Width | 44" |
A proven choice for industrial professionals, this 0.360-inch thick polycarbonate stock sheet offers an optimal balance of impact resistance, toughness, and clarity, crucial for hydraulic system components. Its precise dimensions of 21 inches by 44 inches allow for efficient fabrication of guards, sight glasses, and enclosures where protection against high-pressure fluids and potential impacts is paramount. Polycarbonate's inherent chemical resistance further enhances its suitability for hydraulic applications, providing long-term performance and reliability in challenging operational conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free of debris. 2. Carefully position the polycarbonate sheet, aligning it with mounting points or structural supports. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening which can cause stress concentrations.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners | Use washers and tighten fasteners only until snug to prevent cracking or stress fractures. |
| Using incompatible cleaning agents | Clean with mild soap and water or specialized polycarbonate cleaners. Avoid harsh chemicals like ammonia or abrasive solvents. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Hydraulic system sight glasses, Protective guards for hydraulic machinery, Custom enclosures for hydraulic power units.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||