This robust Polycarbonate stock sheet offers exceptional impact resistance and temperature stability, making it ideal for demanding pressure and temperature control applications requiring a reliable barrier.
| Standard | DIN 933 |
| Material | Polycarbonate |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.341" |
| Length | 40" |
| Width | 19" |
Manufactured under strict quality controls, this 0.341-inch thick Polycarbonate sheet measures 40 inches in length and 19 inches in width. Polycarbonate's inherent properties of high impact strength, excellent clarity (if applicable, otherwise omit), and a broad operating temperature range make it suitable for applications involving moderate pressure differentials and temperature fluctuations. Its chemical resistance and dimensional stability ensure long-term performance in industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Cut sheet to desired dimensions using appropriate tools for polycarbonate. 3. Secure sheet using compatible fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Utilize a fine-toothed saw or laser cutter specifically designed for polycarbonate to achieve clean, chip-free edges. |
| Over-tightening fasteners, leading to stress cracks. | Employ washers and allow for slight expansion by not fully tightening all fasteners until the sheet is properly positioned and stabilized. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: Machine guards in environments with pressure variations, Temperature-controlled enclosures, Pressure vessel sight glasses.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||