This 0.337-inch thick polycarbonate sheet, measuring 26x42 inches, is a premium material for demanding heating and cooling applications. Its superior impact resistance and thermal properties make it an ideal choice.
| Standard | ASME B18 |
| Material | Polycarbonate |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.337" |
| Length | 26" |
| Width | 42" |
Engineered for reliability and performance, this 0.337" thick polycarbonate stock sheet measures 26" in length and 42" in width. Its exceptional impact strength, exceeding that of glass, coupled with excellent optical clarity and UV resistance, makes it a superior choice for environments requiring durability and weatherability. This material exhibits good thermal insulation properties, contributing to energy efficiency in HVAC systems, and is suitable for applications such as protective glazing for HVAC units, air curtain enclosures, and transparent ductwork components where resistance to extreme temperatures and mechanical stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure surfaces are clean and free of debris. 2. Carefully position the polycarbonate sheet according to design specifications. 3. Secure the sheet using appropriate fasteners, avoiding over-tightening to prevent stress cracking.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Drilling holes too close to the edge without consideration for expansion. | Drill holes larger than the fastener diameter to allow for thermal expansion and contraction of the polycarbonate. |
| Using abrasive cleaning agents or tools that can scratch the polycarbonate surface. | Clean with mild soap and water, using a soft cloth. Avoid harsh chemicals and abrasive materials. |
A: This Polycarbonate Stock Sheet is manufactured from Polycarbonate.
A: HVAC Unit Glazing, Air Curtain Enclosures, Transparent Ductwork Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||