This high-performance Nylon Stock Sheet provides exceptional durability for demanding plumbing and janitorial tasks. Its robust material composition ensures longevity and resistance to common environmental stressors.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.079" |
| Length | 23" |
| Width | 23" |
Engineered for reliability and performance, this 0.079-inch thick Nylon Stock Sheet offers a robust solution for industrial needs. Measuring 23 inches by 23 inches, it is fabricated from high-grade nylon, renowned for its excellent tensile strength, abrasion resistance, and broad chemical inertness. This makes it ideal for applications requiring resistance to oils, solvents, and moderate alkaline or acidic conditions. The dense, non-porous surface minimizes fluid absorption and facilitates easy cleaning, a critical factor in janitorial settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 2. Smooth any sharp edges with fine-grit sandpaper. 3. Secure the cut piece in its intended application using suitable fasteners or adhesives.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to delamination or chipping. | Utilize sharp, dedicated plastic or metal cutting tools such as a fine-tooth saw or a sharp utility knife. |
| Failing to properly prepare edges after cutting, resulting in snagging or premature wear. | Always deburr and smooth cut edges to ensure a clean finish and prevent potential damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom gasket fabrication for pipe fittings, Protective barriers in janitorial service areas, Wear pads for machinery and equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||