This high-performance Nylon Stock Sheet offers exceptional durability and chemical resistance. Its robust construction makes it an ideal material for custom fabricated components in demanding plumbing and janitorial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.066" |
| Length | 18" |
| Width | 46" |
Precision-manufactured to tight tolerances, this 0.066" thick Nylon Stock Sheet provides a reliable material solution. Its inherent strength, excellent abrasion resistance, and good chemical inertness make it suitable for fabricating custom parts like shims, gaskets, and protective liners. The generous 18" x 46" dimensions allow for efficient cutting and shaping to meet specific project requirements in industrial and institutional settings.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., bandsaw, utility knife) to precisely cut the material. 3. Deburr any sharp edges for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to ragged edges or material stress. | Employ sharp, appropriate cutting tools designed for plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracks in the nylon. | Apply appropriate torque to fasteners, using washers if necessary, to distribute load and prevent cracking. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gaskets and Seals, Protective Liners and Barriers, Shims and Spacers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||