This high-performance Nylon Stock Sheet is engineered for demanding hydraulic applications. Its robust material properties ensure longevity and reliable operation in challenging industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.026" |
| Length | 39" |
| Width | 36" |
A proven choice for industrial professionals, this 0.026" thick Nylon Stock Sheet provides exceptional mechanical strength, excellent abrasion resistance, and a low coefficient of friction. Measuring 39" in length and 36" in width, it is ideal for custom fabrication of seals, gaskets, wear pads, and protective components within hydraulic systems. Its inherent chemical resistance to oils and greases further enhances its suitability for these critical fluid power applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to the required dimensions using appropriate cutting tools. 2. Prepare mating surfaces for optimal contact. 3. Install fabricated component, ensuring proper fit and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using excessive force during installation, potentially damaging the nylon. | Apply moderate, controlled pressure during installation. Refer to specific component design for recommended torque or load specifications. |
| Not considering the operating temperature range of nylon, leading to premature failure. | Verify that the operating temperature of the hydraulic system is within the specified limits for nylon before installation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wipers, Wear bands and thrust washers in pumps, Anti-extrusion rings and backup washers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||