This robust Nylon stock sheet, measuring 0.161" x 12" x 34", is engineered for superior performance in challenging heating and cooling systems. Its inherent strength and resilience ensure long-term operational integrity.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.161" |
| Length | 12" |
| Width | 34" |
Designed for demanding industrial environments, this Nylon stock sheet boasts a thickness of 0.161 inches, a width of 34 inches, and a length of 12 inches. Fabricated from high-grade Nylon, it exhibits exceptional tensile strength, abrasion resistance, and a high melting point, making it ideal for components within HVAC systems exposed to thermal cycling and mechanical stress. Its low coefficient of friction also contributes to reduced wear in moving parts. This material's chemical inertness ensures compatibility with a wide range of refrigerants and industrial lubricants.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare the mounting surface for optimal adhesion or mechanical fastening. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the cut Nylon component to the designated area within the heating or cooling system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting technique leading to delamination or uneven edges. | Utilize sharp industrial-grade cutting blades specifically designed for plastics, and maintain a consistent cutting speed to prevent material stress. |
| Over-tightening fasteners, causing stress concentration and potential cracking. | Employ torque-limiting tools to ensure fasteners are tightened to the manufacturer's specified torque, preventing material deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC duct liners, Bearing and bushing components, Seals and gaskets in climate control systems.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||