High-performance Nylon Stock Sheet, ideal for demanding hydraulic applications. Offers excellent wear resistance and chemical inertness for prolonged operational life and system integrity.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.024" |
| Length | 36" |
| Width | 32" |
Engineered for reliability and performance, this 0.024-inch thick Nylon stock sheet measures 36 inches in length and 32 inches in width. Manufactured from high-grade nylon, it exhibits superior abrasion resistance, low coefficient of friction, and excellent chemical compatibility with a wide range of hydraulic fluids, oils, and greases. This material's inherent toughness and resilience make it suitable for fabricating custom seals, gaskets, wear pads, and protective components within hydraulic circuits, ensuring consistent operational efficiency and minimizing downtime.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon sheet to the required dimensions using appropriate cutting tools. 2. Prepare mating surfaces for optimal adhesion or fitting. 3. Install the fabricated component, ensuring proper sealing and load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a dull cutting tool, leading to jagged edges and compromised dimensional accuracy. | Utilize sharp, dedicated cutting blades designed for plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, causing stress concentrations and potential material cracking. | Apply fasteners with appropriate torque specifications, utilizing washers if necessary to distribute load. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seal Fabrication, Wear Pad Manufacturing, Protective Component Creation.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||