This high-density Nylon stock sheet offers exceptional mechanical strength and thermal stability. Its robust composition makes it ideal for critical pressure and temperature control components, ensuring reliable performance in demanding industrial environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.781" |
| Length | 15" |
| Width | 27" |
Precision-manufactured to tight tolerances, this Nylon stock sheet boasts a thickness of 0.781 inches, a width of 27 inches, and a length of 15 inches. Fabricated from high-grade Nylon, it exhibits excellent abrasion resistance, low friction, and a high tensile strength, making it suitable for applications requiring resilience against wear and consistent performance under moderate pressure and elevated temperatures. Its inherent dielectric properties also lend themselves to applications within electrical systems where insulation is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate surface is clean, dry, and free from debris. 2. Accurately measure and cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the cut Nylon component to the substrate using suitable mechanical fasteners or adhesives, ensuring even pressure distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the Nylon. | Use torque-limiting tools and distribute fasteners evenly to avoid localized stress. |
| Using adhesives not rated for Nylon or for the operating temperature range. | Consult manufacturer's compatibility charts and select an adhesive specifically designed for Nylon and the intended service conditions. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gaskets and seals for fluid containment systems, Wear pads and guide rails in automated machinery, Insulators and structural components in high-cycle equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||