This robust Nylon stock sheet is engineered for demanding Heating & Cooling environments. Its exceptional durability and thermal properties make it an ideal component for critical system parts.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.776" |
| Length | 35" |
| Width | 29" |
A high-performance industrial component, this Nylon stock sheet boasts a substantial 0.776" thickness, providing exceptional structural integrity and load-bearing capacity. Manufactured from high-grade Nylon, it exhibits superior abrasion resistance, excellent chemical inertness, and a broad operating temperature range, making it suitable for demanding Heating & Cooling applications. The generous 35" length and 29" width offer versatility for fabrication into custom components, seals, gaskets, and wear pads within HVAC systems, heat exchangers, and industrial furnaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the sheet is clean and free from debris. 2. Cut the Nylon stock to the required dimensions using appropriate cutting tools. 3. Mechanically fasten or bond the component according to system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using insufficient fasteners or bonding agents, leading to premature failure. | Utilize fasteners and bonding agents rated for the operating temperature and load conditions of the application. |
| Exposure to aggressive solvents not compatible with Nylon, causing material degradation. | Verify chemical compatibility with the specific operating fluids and environments before installation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC system components, Heat exchanger seals and gaskets, Industrial furnace wear parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||