This premium Nylon stock sheet offers exceptional toughness and wear resistance, engineered for high-performance hydraulic systems. Its robust material properties ensure longevity and reliability in demanding environments, making it a superior choice for critical components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.787" |
| Length | 19" |
| Width | 41" |
Trusted by engineers across multiple sectors, this Nylon stock sheet (0.787" thickness, 19" length, 41" width) is manufactured to stringent industrial standards. Its inherent material properties, including excellent abrasion resistance, low coefficient of friction, and good impact strength, make it exceptionally well-suited for hydraulic components. This grade exhibits superior machinability, allowing for precise fabrication of seals, bearings, and wear pads that withstand high pressures and continuous operation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut sheet to desired component dimensions using appropriate machining tools. 2. Machine finished part to precise tolerances, ensuring smooth surface finishes where required. 3. Inspect finished component for any defects prior to installation into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard machining practices without considering Nylon's thermal expansion. | Account for Nylon's higher coefficient of thermal expansion during machining and design to prevent dimensional instability. |
| Exposing the Nylon to excessive UV radiation for prolonged periods without protection. | If outdoor applications are anticipated, consider UV-stabilized Nylon grades or protective coatings. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Seals, Wear Pads and Bushings, Pump Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||