This high-performance Nylon stock sheet is engineered for demanding industrial environments. Its robust construction and material properties ensure exceptional durability and resistance for critical plumbing and janitorial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.147" |
| Length | 35" |
| Width | 22" |
Purpose-built for heavy-duty applications, this Nylon stock sheet offers superior impact resistance and excellent chemical inertness, making it ideal for corrosive environments. Measuring 0.147 inches thick, 35 inches in length, and 22 inches in width, its solid Nylon composition provides a high tensile strength and low coefficient of friction. This material is well-suited for fabricating custom components, protective barriers, and wear-resistant surfaces within plumbing systems and janitorial equipment, ensuring longevity and operational reliability under strenuous conditions.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the desired dimensions on the Nylon stock sheet using a suitable marking tool. 2. Cut the sheet to the marked dimensions using industrial-grade cutting tools appropriate for Nylon (e.g., saw blades designed for plastics). 3. Smooth any rough edges with a deburring tool or fine-grit sandpaper to ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics. | Employ cutting tools with appropriate blade geometry and materials designed for efficient and clean cutting of Nylon to prevent chipping or melting. |
| Not deburring edges after cutting. | Always deburr cut edges to remove sharp points and prevent potential injury or damage to mating components during installation or use. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom fabricated pipe supports and hangers, Wear strips and guide rails for janitorial equipment, Protective liners for chemical storage tanks and sumps.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||