Engineered from robust nylon, this stock sheet is ideal for fabricating custom hydraulic components. Its superior wear resistance and low coefficient of friction ensure longevity and efficient operation in demanding fluid power applications.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.319" |
| Length | 38" |
| Width | 12" |
A high-performance industrial component, this Nylon Stock Sheet is precisely manufactured to 0.319-inch thickness, with dimensions of 12 inches in width and 38 inches in length. Fabricated from high-grade nylon, it exhibits exceptional tensile strength, excellent abrasion resistance, and a low coefficient of friction, minimizing wear in dynamic hydraulic systems. Its inherent chemical resistance to oils, greases, and many solvents makes it a reliable choice for seals, bearings, wear pads, and structural elements within hydraulic manifolds, cylinders, and valve bodies.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Cut the nylon stock sheet to the desired component dimensions using appropriate cutting tools (e.g., bandsaw, CNC router). 2. Machine edges and surfaces to achieve precise tolerances for mating parts. 3. Install the fabricated component within the hydraulic system, ensuring proper alignment and sealing.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools that can cause delamination or melting of the nylon. | Employ sharp, high-speed cutting tools specifically designed for plastics, such as carbide-tipped saws or router bits, and ensure adequate coolant is used to prevent overheating. |
| Over-tightening fasteners when installing components, leading to stress concentrations and potential cracking. | Use appropriate torque specifications for fasteners and consider using washers to distribute load evenly. Avoid direct metal-to-plastic contact where possible. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wear rings, Pump and valve components, Hydraulic manifold fabrication.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||