This premium Nylon stock sheet is engineered for robust hydraulic systems. Its superior mechanical properties ensure reliable performance and extended service life in demanding operational environments.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.127" |
| Length | 29" |
| Width | 14" |
Manufactured under strict quality controls, this Nylon stock sheet measures 0.127 inches in thickness, 29 inches in length, and 14 inches in width. Its inherent properties of high tensile strength, excellent abrasion resistance, and good chemical inertness make it ideal for components within hydraulic systems. Nylon's low coefficient of friction reduces wear and tear on mating parts, contributing to system efficiency and longevity. It exhibits good impact strength and resistance to oils and greases commonly found in hydraulic fluids.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting area is clean and free of debris. 2. Accurately measure and mark the sheet according to the required dimensions. 3. Utilize appropriate cutting tools (e.g., bandsaw, CNC router) for precise fabrication. 4. Deburr all cut edges to prevent snagging and ensure smooth operation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overtightening fasteners in drilled holes, leading to material deformation or cracking. | Use appropriate torque settings for fasteners and consider using washers to distribute load. |
| Exposing the nylon sheet to continuous high temperatures exceeding its operational limit, causing degradation. | Verify the operating temperature range of the hydraulic system and ensure it remains within the nylon's capabilities. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and guides in hydraulic cylinders, Sealing elements and backup rings, Bushings and bearings for hydraulic components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||