This high-performance Nylon stock sheet is engineered for demanding pressure and temperature control applications. Its robust construction ensures reliability and longevity in harsh industrial settings.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.331" |
| Length | 33" |
| Width | 31" |
A proven choice for industrial professionals, this Nylon stock sheet offers exceptional durability and chemical resistance. With precise dimensions of 0.331" thickness, 33" length, and 31" width, it provides a reliable solution for custom fabrication. Nylon's inherent properties, including excellent wear resistance and a wide operating temperature range, make it ideal for seals, gaskets, wear pads, and structural components within pressure and temperature control systems. Its machinability allows for intricate designs and tight tolerances.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean and prepare mounting surfaces thoroughly. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Install and secure the fabricated component according to system design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools leading to edge fraying or poor tolerances. | Utilize sharp, specialized cutting tools designed for plastics such as carbide-tipped saws or routers for clean, precise cuts. |
| Over-tightening fasteners, causing stress concentrations and potential cracking. | Employ proper torque values and consider using washer systems to distribute load evenly across the Nylon surface. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gasket fabrication for high-pressure systems, Wear strips and guide components, Custom seals and diaphragms for temperature extremes.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||