This robust Nylon stock sheet offers exceptional durability and dimensional stability for critical pressure and temperature control systems. Its precise dimensions ensure seamless integration and reliable performance in demanding industrial environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.204" |
| Length | 26" |
| Width | 42" |
Engineered for reliability and performance, this 0.204-inch thick Nylon stock sheet, measuring 26 inches by 42 inches, is manufactured from high-grade Nylon 6/6. This material exhibits excellent tensile strength, abrasion resistance, and a broad operating temperature range, making it ideal for demanding pressure and temperature control applications. Its low coefficient of friction and good chemical resistance further enhance its suitability for seals, gaskets, and structural components within these systems.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut piece using recommended fasteners or adhesive, ensuring proper fit and seal.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using incorrect cutting tools, leading to rough edges and compromised seal integrity. | Utilize sharp industrial-grade cutting tools specifically designed for plastics to achieve clean, precise edges. |
| Over-tightening fasteners, which can cause stress cracks or deformation in the Nylon sheet. | Apply fasteners with the recommended torque specifications for Nylon to prevent material damage and ensure consistent pressure distribution. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Gaskets for high-pressure fluid systems, Seals in temperature-regulated machinery, Insulating components in control panels.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||