Engineered for resilience, this Nylon Stock Sheet offers exceptional durability and thermal resistance. Ideal for critical components in demanding heating and cooling systems.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.686" |
| Length | 15" |
| Width | 19" |
A proven choice for industrial professionals, this 0.686-inch thick Nylon Stock Sheet, measuring 15 inches by 19 inches, provides superior mechanical strength and excellent resistance to abrasion, chemicals, and moderate temperatures. Its inherent toughness and low coefficient of friction make it ideal for fabricating wear-resistant components, seals, gaskets, and structural supports within HVAC systems, heat exchangers, and industrial cooling apparatus where reliability under stress is paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean the mounting surface thoroughly. 2. Precisely cut the nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component using industry-standard fasteners and adhesives suitable for nylon.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick nylon, leading to melting or uneven edges. | Utilize high-speed steel or carbide-tipped cutting tools with proper cooling to prevent material degradation. |
| Over-tightening fasteners, which can cause stress concentration and potential cracking of the nylon. | Employ torque-limiting tools and consider using washers to distribute load evenly across the fastened area. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: HVAC system components, Heat exchanger seals and gaskets, Industrial cooling apparatus parts.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||