This industrial-grade Nylon stock sheet offers exceptional strength and wear resistance. Precisely manufactured to 0.243" thickness, 41" width, and 45" length for demanding applications.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.243" |
| Length | 41" |
| Width | 45" |
Built to exacting engineering tolerances, this Nylon stock sheet boasts a nominal thickness of 0.243 inches, a width of 45 inches, and a length of 41 inches. Fabricated from high-density Nylon, it exhibits superior tensile strength, excellent abrasion resistance, and low coefficient of friction. These properties make it ideal for use in wear pads, bushings, gears, and protective components where durability and smooth operation are paramount. Its chemical resistance also ensures longevity in various industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean and free of debris. 2. Accurately measure and cut the Nylon sheet to the required dimensions. 3. Securely fasten the sheet using appropriate industrial-grade fasteners or adhesives, ensuring proper load distribution.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Oversizing cuts leading to improper fit and reduced performance. | Always double-check measurements and use precision cutting tools for accurate dimensions. |
| Using inappropriate fasteners that can damage the Nylon or compromise structural integrity. | Select fasteners designed for use with Nylon, considering load capacity and expansion/contraction. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Plates and Strips, Custom Bushings and Bearings, Protective Guards and Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||