This robust Nylon Stock Sheet provides exceptional durability and chemical resistance, ideal for demanding plumbing and janitorial applications. Its precise dimensions ensure seamless integration into custom fabrication projects.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.233" |
| Length | 21" |
| Width | 40" |
Built to exacting engineering tolerances, this Nylon Stock Sheet offers superior wear resistance and structural integrity. Measuring 0.233 inches in thickness, 21 inches in length, and 40 inches in width, it's fabricated from high-performance nylon, known for its excellent tensile strength, low coefficient of friction, and resistance to a broad spectrum of chemicals, oils, and solvents. These properties make it an optimal choice for fabricating custom seals, gaskets, wear pads, and components requiring robust performance in corrosive or abrasive environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the required dimensions on the nylon stock sheet using a scribe or permanent marker. 2. Utilize appropriate cutting tools (e.g., industrial saw, router with a suitable bit) to precisely cut the marked sections. 3. Smooth any rough edges with a deburring tool or fine-grit sandpaper for a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Employ cutting tools with sharp, appropriately angled blades designed for nylon or plastics, and maintain adequate cutting speed to prevent heat buildup. |
| Over-tightening fasteners when mounting, causing stress fractures in the nylon. | Use washers and avoid overtightening fasteners. Allow for thermal expansion and contraction of the nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Gasket and Seal Fabrication, Wear Strips and Bushings, Protective Barriers and Liners.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||