This robust Nylon Stock Sheet offers exceptional durability and performance, engineered for rigorous industrial applications. Its superior wear resistance and self-lubricating properties make it a cost-effective choice for demanding environments.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Zinc Plated |
| Grade | N/A |
| Thickness | 0.773" |
| Length | 36" |
| Width | 24" |
Designed for demanding industrial environments, this Nylon Stock Sheet boasts a substantial thickness of 0.773 inches, a generous length of 36 inches, and a width of 24 inches. Manufactured from high-quality nylon, it exhibits excellent tensile strength, high impact resistance, and superior abrasion and wear characteristics. Its inherent electrical insulating properties and good chemical resistance make it suitable for a wide array of mechanical components, bushings, gears, and wear pads in heavy machinery and processing equipment where reliability and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the cutting surface is clean and stable. 2. Precisely measure and mark the desired dimensions on the nylon stock sheet. 3. Utilize appropriate cutting tools (e.g., industrial saw with a fine-tooth blade) to make clean, accurate cuts. Avoid excessive heat buildup during cutting.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking blades which can cause chipping or melting. | Employ carbide-tipped blades designed for plastics or use a specialized routing bit for a clean finish. |
| Overheating the material during cutting, leading to deformation. | Maintain a consistent cutting speed and use a coolant if necessary to manage heat. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear Strips and Guides, Bushings and Bearings, Gears and Sprockets, Electrical Insulators, Protective Covers.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||