This robust Nylon stock sheet, measuring 0.282" thick, 35" wide, and 40" long, is engineered for superior performance in demanding hydraulic systems, offering exceptional durability and low friction.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.282" |
| Length | 35" |
| Width | 40" |
Trusted by engineers across multiple sectors, this high-grade Nylon stock sheet boasts a precise thickness of 0.282 inches, a width of 35 inches, and a length of 40 inches. Its inherent toughness, excellent abrasion resistance, and low coefficient of friction make it an ideal material for critical components within hydraulic systems, including wear pads, seals, and bushings. The material's resilience to impact and chemical degradation further ensures reliable operation in challenging industrial environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Prepare the substrate by ensuring it is clean, dry, and free of contaminants. 2. Accurately cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Secure the cut Nylon component to its designated location using approved fastening methods, ensuring proper alignment and fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard nylon instead of hydraulic-grade nylon | Always specify and use hydraulic-grade nylon for components exposed to high pressures and dynamic loads to ensure optimal performance and longevity. |
| Inadequate surface preparation before installation | Ensure all mating surfaces are meticulously cleaned and deburred to prevent premature wear and ensure proper seating of the nylon component. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Wear Rings, Pump Components, Seal Back-up Rings, Bushings and Bearings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||