This robust Nylon stock sheet offers exceptional durability, wear resistance, and electrical insulation properties, making it a versatile material for demanding industrial applications and custom component fabrication.
| Standard | DIN 933 |
| Material | Nylon |
| Finish | Black Oxide |
| Grade | N/A |
| Thickness | 0.055" |
| Length | 38" |
| Width | 44" |
A high-performance industrial component, this 0.055-inch thick Nylon stock sheet provides an excellent balance of strength, rigidity, and impact resistance. Manufactured from high-grade Nylon, it exhibits superior abrasion and chemical resistance, along with good dielectric properties. Its generous dimensions of 38 inches by 44 inches allow for efficient cutting and fabrication of larger parts or multiple smaller components. This material is well-suited for applications requiring a lightweight yet tough solution, including wear pads, electrical insulators, and structural components in challenging environments.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark desired dimensions on the nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., industrial saw with fine-tooth blade, CNC router) for precise cuts. 3. Finish edges as required using deburring tools or fine grit sandpaper.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | DIN 933 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard saw blades not designed for plastics, leading to melting or chipping. | Employ blades with a high tooth count and positive rake angle for clean, chip-free cuts. |
| Insufficient support during cutting, causing the sheet to flex and result in inaccurate dimensions. | Ensure the sheet is adequately supported on a flat, stable surface during the cutting process. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Wear pads and bushings, Electrical insulators and barriers, Custom gaskets and seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||