High-performance Nylon stock sheet engineered for critical hydraulic systems. Its exceptional durability and dimensional stability ensure reliable operation and extended service life for fabricated components.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.504" |
| Length | 27" |
| Width | 28" |
Engineered for reliability and performance, this 0.504-inch thick Nylon stock sheet boasts a robust 27-inch length and 28-inch width, ideal for custom component manufacturing. Nylon's inherent properties, including excellent abrasion resistance, high impact strength, and good chemical resistance to hydraulic fluids, make it a preferred material for demanding hydraulic applications. Its low coefficient of friction minimizes wear and tear on mating parts, contributing to system efficiency and longevity. This material is well-suited for fabricating seals, bearings, wear pads, and other components requiring exceptional toughness and resilience under pressure.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark the desired component dimensions on the Nylon stock sheet. 2. Utilize appropriate cutting tools (e.g., band saw, CNC router) to precisely cut the component. 3. Deburr all edges and surfaces to ensure smooth operation and prevent material fatigue.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting tool selection leading to delamination or chipping. | Use sharp, carbide-tipped blades specifically designed for cutting plastics and ensure proper feed rates to prevent excessive heat build-up. |
| Failure to account for thermal expansion during component design. | Consider the operating temperature range of the hydraulic system and allow for adequate clearance to accommodate potential expansion or contraction of the Nylon component. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder components, Seals and O-rings, Wear strips and guides.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||