This high-strength Nylon stock sheet offers superior wear resistance, excellent impact strength, and good chemical resistance. Ideal for custom fabrication of components requiring durability and resilience in demanding environments.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.493" |
| Length | 33" |
| Width | 36" |
Specified by design engineers worldwide, this Nylon stock sheet delivers exceptional mechanical performance. Its 0.493-inch nominal thickness, combined with a substantial 33-inch by 36-inch dimension, provides ample material for complex machining and fabrication. Nylon's inherent lubricity, high tensile strength, and resistance to abrasion make it a preferred material for gears, bushings, wear pads, and structural components where operational reliability and longevity are paramount. It exhibits excellent machinability and can be readily formed into precise shapes.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Accurately measure and mark dimensions for cutting. 2. Utilize appropriate cutting tools (e.g., band saw, router) for precision. 3. Smooth edges and deburr as per application requirements.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Overheating during machining, causing material degradation. | Employ sharp tooling and adequate cooling lubricant during cutting and milling operations. |
| Not accounting for moisture absorption in dimensional stability calculations. | Consider Nylon's hygroscopic nature and allow for expansion/contraction in designs, especially in humid environments. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom Bushings and Bearings, Wear Plates and Guides, Gears and Sprockets, Protective Covers and Shields, Insulators and Structural Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||