High-performance Nylon stock sheet, precisely fabricated for critical hydraulic systems. Its robust material properties ensure longevity and reliability under extreme operational pressures and conditions.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.541" |
| Length | 28" |
| Width | 32" |
Designed for demanding industrial environments, this 0.541" thick Nylon stock sheet measures 28" in length and 32" in width. Fabricated from a high-grade Nylon, it exhibits superior abrasion resistance, excellent impact strength, and a low coefficient of friction, making it ideal for wear pads, seals, and components within high-pressure hydraulic circuits. Its dimensional stability and resistance to common hydraulic fluids ensure consistent performance and extended service life in challenging applications.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the mounting surface is clean, dry, and free of debris. 2. Precisely cut the Nylon stock sheet to the required dimensions using appropriate industrial cutting tools. 3. Securely fasten the sheet using specified hardware, ensuring even pressure distribution to prevent deformation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to uneven edges. | Utilize a sharp, high-quality cutting tool designed for plastics and ensure a steady hand or automated cutting process for precise, burr-free edges. |
| Over-tightening fasteners, causing stress concentrations. | Employ torque-limiting tools and follow recommended fastener torque specifications for Nylon to avoid material cracking or deformation. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder wear rings, Seal components in fluid power systems, Protective liners for hydraulic reservoirs.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||