This precision-engineered Nylon stock sheet offers exceptional durability and low friction for critical hydraulic systems. Its robust material properties ensure reliable performance under demanding conditions, making it ideal for custom fabrication.
| Standard | ASME B18 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.222" |
| Length | 25" |
| Width | 14" |
Precision-manufactured to tight tolerances, this Nylon stock sheet measures 0.222 inches in thickness, 25 inches in length, and 14 inches in width. Composed of high-grade Nylon, it exhibits excellent tensile strength, superior abrasion resistance, and a low coefficient of friction, crucial for reducing wear in dynamic hydraulic components. Its inherent chemical resistance to oils and solvents further enhances its suitability for fluid power applications, ensuring longevity and operational integrity in environments prone to contamination or aggressive media.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the surface is clean, dry, and free of debris. 2. Cut the Nylon stock sheet to the required dimensions using appropriate cutting tools. 3. Securely fasten the fabricated component using suitable fasteners or bonding agents, ensuring proper alignment with mating parts.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASME B18 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for plastics, leading to chipping or melting. | Utilize sharp, carbide-tipped blades specifically designed for cutting Nylon or other plastics to ensure clean, precise cuts. |
| Over-tightening fasteners, which can cause stress cracking or deformation in the Nylon. | Employ torque-limiting tools or use washers to distribute pressure evenly, preventing excessive localized stress on the Nylon material. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom hydraulic manifold fabrication, Wear pads and guide blocks, Sealing components and backup rings.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||