This robust Nylon Stock Sheet offers exceptional durability and chemical resistance for rigorous plumbing and janitorial environments. Its substantial thickness provides superior impact absorption and wear resistance for long-term performance.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.735" |
| Length | 38" |
| Width | 21" |
Built to exacting engineering tolerances, this Nylon Stock Sheet features a precise thickness of 0.735 inches, a generous length of 38 inches, and a width of 21 inches. Fabricated from high-grade nylon, it exhibits excellent tensile strength, abrasion resistance, and resistance to common industrial chemicals, oils, and solvents. This makes it ideal for fabricating custom components, wear pads, or protective barriers within plumbing systems and janitorial equipment where resilience and longevity are paramount.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Measure and mark the required dimensions on the Nylon Stock Sheet using a suitable marking tool. 2. Carefully cut the sheet to size using a high-speed saw or industrial-grade cutting tool designed for plastics. 3. Smooth any rough edges with a file or deburring tool to ensure a clean finish.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using a standard saw blade not designed for plastics, leading to melting or chipping. | Employ a saw blade with a high tooth count and appropriate rake angle specifically designed for cutting nylon or plastics to prevent heat buildup and ensure a clean cut. |
| Overheating the material during cutting, causing deformation or loss of structural integrity. | Maintain a consistent cutting speed and use adequate lubrication (if recommended for the specific cutting tool) to dissipate heat and prevent thermal damage to the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom fabricated pipe supports and hangers, Wear strips and guide rails for cleaning equipment, Protective barriers and impact plates in high-traffic janitorial areas.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||