This high-grade Nylon stock sheet is engineered for robust performance in hydraulic systems. Its precise dimensions and superior material properties ensure reliable operation and extended service life in demanding environments.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.415" |
| Length | 24" |
| Width | 47" |
Precision-manufactured to tight tolerances, this 0.415" thick Nylon stock sheet offers exceptional dimensional stability. Composed of high-impact Nylon 6, it exhibits excellent tensile strength, abrasion resistance, and a low coefficient of friction, making it ideal for components requiring smooth operation and minimal wear in hydraulic fluid environments. The 24" x 47" sheet provides ample material for custom fabrication of seals, wear pads, bushings, and other critical hydraulic parts, ensuring a precise fit and optimal performance.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Verify dimensions and surface finish of the Nylon stock sheet against application requirements. 2. Machine components using standard industrial practices for Nylon, employing appropriate cutting speeds and lubrication. 3. Deburr all edges and clean thoroughly to remove any machining debris before installation.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper machining speeds causing excessive heat buildup and material deformation. | Utilize slower machining speeds and copious amounts of coolant to manage heat dissipation effectively. |
| Over-tightening fasteners, leading to stress concentration and potential cracking of Nylon components. | Apply torque gradually and use appropriate washers to distribute load evenly. Consult material property data for recommended torque values. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic cylinder seals and wipers, Wear pads and guides for hydraulic machinery, Bushings and bearings in hydraulic pumps and valves.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||