This robust Nylon stock sheet offers exceptional wear resistance, excellent electrical insulation, and superior mechanical strength. Precisely manufactured for diverse industrial applications.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Plain |
| Grade | N/A |
| Thickness | 0.762" |
| Length | 34" |
| Width | 18" |
Manufactured under strict quality controls, this Nylon stock sheet boasts a substantial 0.762-inch thickness, a generous 34-inch length, and an 18-inch width. Fabricated from high-performance Nylon, it exhibits remarkable tensile strength, low coefficient of friction, and excellent chemical resistance, making it ideal for demanding environments. Its inherent toughness and impact resistance ensure longevity in applications such as custom fabricated parts, wear pads, bushings, and electrical insulators.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the substrate is clean, dry, and free from contaminants. 2. Cut the Nylon stock sheet to the desired dimensions using appropriate cutting tools. 3. Secure the sheet using suitable fasteners or adhesives, ensuring a stable and flush fit.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Improper cutting leading to stress fractures. | Utilize sharp, dedicated cutting tools designed for plastics and maintain a consistent cutting speed to prevent overheating and chipping. |
| Over-tightening fasteners, causing deformation. | Employ washers to distribute load and tighten fasteners incrementally, avoiding excessive torque that could compromise the sheet's integrity. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom fabricated mechanical components, Wear pads and guides, Bushings and bearings, Electrical insulators, Gaskets and seals.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||