This high-grade Nylon stock sheet provides exceptional durability and performance for critical hydraulic systems. Its robust material composition ensures longevity and reliability under extreme operational pressures and wear.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Anodized |
| Grade | N/A |
| Thickness | 0.843" |
| Length | 44" |
| Width | 29" |
Designed for demanding industrial environments, this 0.843" thick Nylon stock sheet boasts a substantial 44" width and 29" length, offering ample material for fabrication. Engineered with superior abrasion resistance, low coefficient of friction, and excellent tensile strength, it effectively withstands high pressures and shock loads common in hydraulic applications. Its inherent toughness and resistance to moisture absorption ensure consistent performance and dimensional stability in challenging operational conditions, making it ideal for seals, wear pads, and manifold components.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Carefully measure and mark cut lines on the Nylon stock sheet according to design specifications. 2. Utilize appropriate cutting tools (e.g., band saw, router) for precise fabrication, ensuring clean edges. 3. Smooth any rough edges with a deburring tool or fine grit sandpaper before assembly into the hydraulic system.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools without proper blade selection can lead to chipping or melting of the nylon. | Employ sharp, carbide-tipped blades designed for plastics and maintain a consistent cutting speed to prevent overheating and ensure clean cuts. |
| Over-tightening fasteners can cause stress concentrations and potential cracking of the nylon component. | Use appropriate torque specifications for fasteners, and consider using washers to distribute load evenly across the surface of the nylon. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Seals and Gaskets, Wear Strips and Bushings, Manifold Blocks and Valve Components.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||