This robust Nylon stock sheet, precisely manufactured, offers exceptional wear resistance and impact strength, making it a superior choice for critical hydraulic component fabrication and repair.
| Standard | ISO 9001 |
| Material | Nylon |
| Finish | Passivated |
| Grade | N/A |
| Thickness | 0.700" |
| Length | 45" |
| Width | 24" |
Manufactured under strict quality controls, this Nylon stock sheet exhibits a nominal thickness of 0.700 inches, a length of 45 inches, and a width of 24 inches. The inherent properties of nylon, including excellent tensile strength, high abrasion resistance, and good chemical compatibility, make it ideal for fabricating seals, wear pads, bushings, and other components within hydraulic systems that experience significant mechanical stress and friction. Its machinability allows for precise custom part creation.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Ensure the nylon sheet is clean and free of contaminants before machining. 2. Utilize appropriate cutting tools and speeds for nylon to prevent overheating and melting. 3. Fasten fabricated parts securely within the hydraulic system, adhering to design specifications.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ISO 9001 |
| Burst Pressure | 4x Working Pressure (Typical) |
| Working Pressure | See Manufacturer Specs |
| Temperature Range | -20°F to 400°F (-29°C to 204°C) |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Moderate |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard woodworking tools without proper adjustments. | Employ sharp, high-speed steel or carbide cutting tools specifically designed for plastics. Reduce cutting speeds and use coolant to prevent melting. |
| Over-tightening fasteners, leading to material deformation or cracking. | Apply appropriate torque values for nylon components, as specified by the system design. Use washers to distribute load if necessary. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Hydraulic Cylinder Components, Wear Strips and Bushings, Seals and Gaskets.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||