This robust Nylon Stock Sheet offers exceptional tensile strength and wear resistance. Its substantial dimensions and durable nylon construction make it ideal for heavy-duty pulling and lifting operations where reliability is paramount.
| Standard | ASTM A106 |
| Material | Nylon |
| Finish | Galvanized |
| Grade | N/A |
| Thickness | 0.787" |
| Length | 46" |
| Width | 17" |
Specified by design engineers worldwide, this Nylon Stock Sheet boasts a nominal thickness of 0.787 inches (20mm), a length of 46 inches (1168mm), and a width of 17 inches (432mm). Fabricated from high-grade nylon, it exhibits excellent abrasion resistance, high impact strength, and a low coefficient of friction, ensuring efficient operation and extended service life in demanding industrial environments. Its robust composition makes it suitable for custom fabrication of critical components in pulling and lifting machinery, including sheaves, rollers, and bearing surfaces.
This component strictly adheres to the tolerances, material specifications, and quality benchmarks set by the world's leading industrial manufacturers.
1. Clean mounting surfaces thoroughly to remove debris and contaminants. 2. Precisely cut the nylon stock sheet to the required dimensions using appropriate tooling. 3. Secure the fabricated component using engineered fasteners, ensuring proper torque and alignment.
| Standard System | Designation |
|---|---|
| ISO Equivalent | ISO 9001:2015 Mfg |
| DIN Equivalent | Industry Standard |
| Primary Standard | ASTM A106 |
| Tensile Strength | Standard Commercial Spec |
| Yield Strength | Standard Commercial Spec |
| Hardness | Varies by specific batch |
| Size / Type | Est. Weight (lbs/100) | Shipping Weight (kg) |
|---|---|---|
| Standard | Varies by dimension | Contact Sales |
| Environment | Rating |
|---|---|
| Indoor / Dry | Excellent |
| Outdoor / Exposed | Excellent |
| Marine / Saltwater | Not Recommended |
| Chemical / Acidic | Not Recommended |
| ❌ Mistake | ✅ Correct Approach |
|---|---|
| Using standard cutting tools not designed for thick nylon, leading to chipping or uneven edges. | Employ carbide-tipped blades or specialized routing bits for clean, precise cuts on thick nylon stock. |
| Over-tightening fasteners, which can stress and deform the nylon material. | Utilize torque wrenches to adhere to specified fastener torque values and avoid material damage. |
A: This Nylon Stock Sheet is manufactured from Nylon.
A: Custom fabricated sheaves for winches and hoists, Wear pads and guides for heavy-duty pulling systems, Impact-resistant components in lifting equipment.
Conversion factor: 1 ft-lb ≈ 1.356 Nm
| Status | Mating Component | Standard | Torque Spec | Engineering Notes |
|---|---|---|---|---|
| No verified compatibility data found for this component. | ||||